top of page
  • White Facebook Icon
  • White Instagram Icon

DEK MATE

CUSTOM EVA MARINE FLOORING

PRODUCT WARRANTY, CARE & AFTERCARE POLICY

BUILT TO PERFORM. MADE TO LAST.

At Dek Mate, we take pride in producing premium custom EVA marine flooring designed to withstand the demanding conditions of the Australian marine environment.

Our flooring is manufactured using ultra-high-density, non-colour-bleed, closed-cell EVA foam and premium 3M adhesive backing, delivering exceptional durability, comfort, grip and performance.

While Dek Mate flooring is engineered to handle tough marine conditions, like all premium marine products, it requires proper care and maintenance to ensure maximum longevity.

Following the care and aftercare instructions below will help protect your investment, maintain its appearance and ensure your Dek Mate flooring performs at its best for years to come.

1. PRODUCT WARRANTY

Dek Mate warrants that its custom EVA marine flooring will be free from defects in materials and manufacturing workmanship under normal marine use, subject to the warranty terms, exclusions and care requirements outlined in this document.

Warranty Period: 12 Month Conditional Warranty

The voluntary warranty applies from the original date of purchase and is available to the original purchaser upon presentation of valid proof of purchase.

This warranty covers verified defects attributable to the manufacturing process or materials supplied by Dek Mate.

1.1 What Is Covered?

Subject to assessment, the Dek Mate product warranty covers:

  • Manufacturing defects in the EVA foam material.

  • Premature material deterioration directly attributable to a verified manufacturing defect.

  • Defects in the supplied adhesive backing resulting from faulty materials or manufacturing.

  • Other verified faults in materials or workmanship that arise under normal use and proper care.

Where a valid warranty claim is accepted, Dek Mate will provide an appropriate remedy in accordance with this warranty and applicable Australian Consumer Law.

1.2 What Is Not Covered?

Dek Mate custom EVA marine flooring is manufactured using premium materials designed for demanding marine environments. However, EVA foam has limitations when exposed to excessive heat, concentrated sunlight, harsh chemicals and improper use.

The Dek Mate voluntary product warranty does not cover damage or deterioration caused by the following conditions, unless the issue is attributable to a covered manufacturing defect.

A. Excessive Heat & Exceeding Temperature Limits

EVA foam is designed to tolerate normal marine conditions; however, prolonged exposure to elevated surface temperatures can cause permanent damage.

For the purposes of Dek Mate's care and warranty guidelines, the following temperature thresholds should be observed:

  • Above 40°C (104°F): Prolonged exposure may contribute to accelerated deterioration, dimensional changes, hardening or other heat-related damage.

  • Above 45°C (113°F): Extended exposure, particularly beyond four hours, may contribute to fading, discolouration or changes to the material's appearance.

  • Above 50°C (122°F): Extended exposure, particularly beyond six hours, may cause softening, blistering, warping, shrinking, adhesive deterioration or loss of surface grip.

These temperatures refer to the actual flooring surface temperature, not the surrounding air temperature. Flooring exposed to direct sunlight can become significantly hotter than the ambient temperature.

Damage caused by excessive surface temperatures, including warping, shrinkage, blistering, deformation, discolouration or adhesive failure, is excluded from the voluntary warranty where attributable to heat exposure rather than a manufacturing defect.

B. Light Amplification, Reflection & Magnification

Damage resulting from concentrated sunlight or light amplification is not covered under the voluntary warranty.

Light amplification can occur when sunlight is reflected, refracted or focused by surrounding boat surfaces, including:

  • Curved glass windscreens and windows.

  • Glass or clear canopies.

  • Reflective stainless steel fittings.

  • Polished or glossy gelcoat surfaces.

  • Other reflective surfaces capable of concentrating sunlight.

These conditions can create localised hot spots that exceed the recommended operating temperature of the EVA foam and adhesive, even when the surrounding air temperature is relatively mild.

Resulting damage may include melting, bubbling, warping, shrinking, discolouration, surface deformation or adhesive separation.

Boats with light-coloured gelcoat finishes, highly reflective surfaces or large curved windscreens may be particularly susceptible to concentrated solar heating.

C. Prolonged UV & Direct Sunlight Exposure

Although Dek Mate flooring is designed for outdoor marine use, prolonged or excessive exposure to direct sunlight and UV radiation may cause gradual deterioration.

The voluntary warranty does not cover UV-related fading, discolouration, hardening, accelerated surface wear or heat-related damage resulting from excessive or prolonged exposure, unless attributable to a manufacturing defect.

In hot summer or tropical conditions, we recommend minimising prolonged direct sunlight exposure during peak hours, particularly between 11:00 AM and 3:00 PM.

Where practical, boats should be stored undercover or protected with suitable covers or shade structures when not in use.

D. Improper Cleaning & Chemical Exposure

Damage caused by solvents, fuels, petrochemicals, harsh cleaning agents, aggressive degreasers or other unsuitable chemicals is not covered.

This includes deterioration of the EVA foam, staining, discolouration or weakening of the adhesive backing.

E. Incorrect Pressure Washing

Damage caused by pressure washing with a narrow or concentrated spray, operating the nozzle closer than 60 cm to the flooring, or directing high-pressure water at edges, corners or joins is excluded.

This includes surface damage, lifting, peeling and adhesive separation.

F. Incorrect Installation or Initial Adhesive Curing

Damage caused by inadequate surface preparation, unsuitable installation surfaces, incorrect installation procedures or failure to allow the recommended 3–5-day initial adhesive bonding period is excluded where the issue is not attributable to Dek Mate's own workmanship or a product defect.

G. Normal Wear, Accidental Damage & Misuse

The voluntary warranty does not cover normal wear and tear, cuts, gouges, punctures, burns, impact damage, excessive abrasion, misuse, neglect or unauthorised alterations.

These exclusions apply only to the voluntary warranty and do not limit any rights or remedies available under Australian Consumer Law.

2. CARE & AFTERCARE INSTRUCTIONS

LOOK AFTER YOUR DEK, AND YOUR DEK WILL LOOK AFTER YOU!

Dek Mate flooring has been designed to deliver exceptional durability in demanding marine environments. However, correct care and maintenance are essential to preserving its appearance, adhesive bond and long-term performance.

Please read and follow the instructions below.

2.1 SAFE STICK TIME — INITIAL ADHESIVE CURING

Allow 3–5 days after installation before washing or subjecting your flooring to heavy use.

Dek Mate uses premium 3M adhesive backing designed to create a strong, long-lasting bond with properly prepared marine surfaces.

Following installation, the adhesive requires sufficient time to develop its bond strength.

For the first 3–5 days:

  • Avoid washing or pressure cleaning the flooring.

  • Avoid heavy foot traffic or strenuous activity on the newly installed deck.

  • Do not lift, pull or disturb the edges of the flooring.

  • Avoid unnecessary exposure to excessive moisture or harsh conditions.

Allowing the adhesive to bond properly is essential to achieving the best possible adhesion and long-term performance.

Damage or lifting caused by disturbing the flooring during the initial bonding period is not covered under the voluntary warranty.

2.2 WASHING & CLEANING

Use gentle, marine-safe cleaning products to keep your Dek Mate looking its best.

Regular cleaning helps maintain the appearance and condition of your flooring.

We recommend washing your Dek Mate flooring with fresh water and a suitable mild cleaning solution, using a soft or medium-bristle brush or broom where required.

Recommended cleaning products include:

  • Bowden's Own marine-compatible Wash & Wax products.

  • Salty Captain marine wash products.

  • Meguiar's marine wash products.

  • Vanish liquid laundry detergent, suitably diluted and tested on an inconspicuous area for stubborn stains.

Always follow the cleaning product manufacturer's instructions and rinse the flooring thoroughly with fresh water after cleaning.

IMPORTANT — DO NOT USE:

  • Solvent-based cleaners.

  • Petrol, diesel, thinners or other petrochemical-based cleaning products.

  • Acetone or aggressive degreasers.

  • Harsh chemicals, acidic cleaners or abrasive cleaning agents.

  • Wire brushes, stiff abrasive pads or sharp cleaning tools.

These products may damage the EVA foam, affect its appearance or compromise the adhesive backing.

Damage resulting from unsuitable cleaning chemicals or methods is excluded from the voluntary warranty.

2.3 PRESSURE WASHING

Pressure washing must be carried out with extreme care.

Although Dek Mate flooring can tolerate gentle pressure washing when performed correctly, we recommend regular hand washing wherever possible.

If using a pressure washer:

  • Always maintain a minimum distance of 60 cm between the nozzle and the flooring.

  • Use a gentle, wide spray pattern.

  • Never use a narrow, concentrated jet or pinpoint nozzle.

  • Never direct high-pressure water at the edges, joins or corners of the flooring.

  • Avoid prolonged spraying in one location.

  • Never attempt to force water underneath the flooring.

High-pressure water can create extreme force over a small area, potentially damaging the EVA foam or lifting the adhesive bond from the boat's surface.

Edges and corners are particularly vulnerable to concentrated pressure.

Damage caused by excessive water pressure, incorrect nozzle selection or improper pressure-washing techniques is not covered under the voluntary warranty.

2.4 STORAGE & UV PROTECTION

Protecting your boat from prolonged sunlight exposure is one of the best ways to extend the life of your Dek Mate flooring.

Dek Mate is designed for outdoor marine use. However, prolonged exposure to direct sunlight, UV radiation and extreme temperatures can gradually affect EVA foam and adhesive materials.

Over time, excessive exposure may contribute to:

  • Colour fading or discolouration.

  • Hardening of the EVA foam.

  • Accelerated surface wear.

  • Reduced adhesive performance.

  • Heat-related material distortion.

To maximise the lifespan of your flooring, we strongly recommend:

  • Storing your boat undercover whenever practical.

  • Using a suitable boat cover when the vessel is not in use.

  • Avoiding unnecessary long-term exposure to direct sunlight.

  • Providing shade to exposed flooring areas during extended storage.

  • Reducing prolonged direct sunlight exposure during peak summer hours, particularly between 11:00 AM and 3:00 PM.

These simple preventative measures can significantly help preserve your flooring's appearance and performance.

2.5 LIGHT AMPLIFICATION — REFLECTION, REFRACTION & MAGNIFICATION

IMPORTANT: Concentrated sunlight can cause extreme temperatures and permanently damage EVA marine flooring.

Light amplification and concentrated solar heating are important considerations for all EVA marine flooring products.

Under certain conditions, sunlight can be reflected, refracted or focused by surrounding surfaces, creating concentrated areas of intense heat.

Common sources include:

  • Curved glass windscreens.

  • Boat windows and canopies.

  • Reflective stainless steel fittings.

  • Highly polished or glossy gelcoat surfaces.

  • Other reflective or curved surfaces capable of concentrating sunlight.

These effects can create localised temperatures significantly higher than the surrounding air temperature, potentially exceeding the safe operating limits of the EVA foam and adhesive.

This may result in:

  • Warping or distortion of the flooring.

  • Localised shrinking or expansion.

  • Surface bubbling or deformation.

  • Discolouration or heat damage.

  • Adhesive softening, lifting or separation.

Boats with light-coloured gelcoat finishes, highly reflective surfaces or large curved windscreens may be particularly susceptible to concentrated solar heating.

HOW TO HELP PREVENT LIGHT AMPLIFICATION DAMAGE

We strongly recommend storing your boat in a covered or shaded environment whenever possible.

Where outdoor storage is unavoidable, use a suitable boat cover or other protective measures to prevent concentrated sunlight from reaching vulnerable flooring areas.

Particular attention should be paid to areas beneath windscreens, windows and reflective fittings.

Please note: Damage caused by concentrated sunlight, reflected heat, magnification or temperatures exceeding the product's operating limits is not covered under the voluntary Dek Mate warranty, unless the damage is attributable to a defect covered by that warranty.

3. GENERAL USE & MAINTENANCE

To help ensure the longest possible life from your Dek Mate flooring, we also recommend the following:

  • Clean your flooring regularly to remove dirt, salt, fish residue and other contaminants.

  • Rinse with fresh water after exposure to saltwater or heavy soiling.

  • Avoid dragging sharp, heavy or abrasive objects across the surface.

  • Take care when handling fishing equipment, anchors, tools and other potentially damaging items.

  • Clean up fuel, oil and chemical spills immediately using a suitable cleaning method.

  • Avoid placing excessively hot objects directly onto the flooring.

  • Inspect edges and joins periodically for signs of damage or lifting.

  • Contact Dek Mate if you notice any unusual material deterioration or adhesion issues.

Prompt attention to potential issues can help prevent minor damage from becoming more extensive.

4. WARRANTY CLAIMS

If you believe your Dek Mate flooring has developed a manufacturing defect, please contact our customer service team.

To assist with the assessment of your claim, please provide:

  1. Your name and contact details.

  2. Your original proof of purchase or invoice number.

  3. The date of purchase and installation, if known.

  4. A description of the issue.

  5. Clear photographs showing the affected area and the surrounding flooring.

  6. Any additional information reasonably required to assess the claim.

Dek Mate may request further photographs, inspection or other reasonable evidence to determine the cause of the reported issue.

Each claim will be assessed individually, taking into account the nature of the fault, installation circumstances, usage conditions and applicable consumer rights.

Where a claim is accepted, Dek Mate will provide the remedy required under applicable law or the terms of its voluntary warranty.

5. IMPORTANT WARRANTY CONDITIONS

Dek Mate flooring is manufactured using high-quality materials designed for demanding marine environments. However, its longevity depends on correct installation, use, cleaning, maintenance and storage.

Failure to follow the care and aftercare instructions may result in damage that is excluded from the voluntary warranty where that damage is caused by improper care, misuse or exposure to unsuitable conditions.

IMPORTANT: Failure to follow the care instructions does not automatically remove all warranty rights. Any exclusion must be relevant to the cause of the damage, and nothing in these terms excludes, restricts or modifies any rights or remedies that cannot lawfully be excluded under Australian Consumer Law.

6. AUSTRALIAN CONSUMER LAW

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.

You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.

You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

The benefits provided under the Dek Mate voluntary warranty are in addition to other rights and remedies available to consumers under Australian Consumer Law.

Nothing in this warranty limits or excludes those statutory rights.

PROTECT YOUR INVESTMENT

Your Dek Mate flooring is built for adventure, designed for comfort and made to handle the demanding Australian marine lifestyle.

With proper care, regular cleaning and sensible protection from excessive heat and UV exposure, you can help keep your flooring looking great and performing at its best for years to come.

DEK MATE — PREMIUM CUSTOM EVA MARINE FLOORING

Built tough. Made for the water.

Warranty Contact Details

Dek Mate
Email: info@dekmate.com.au

Warranty Provider: Dek Mate Pty. Ltd.

bottom of page